Martin Rush FiberSource 1 LED

  • Rental Rates

  • 1 Week $44.00
  • 2 Weeks $83.00
  • 4 Weeks $149.00
  • A highly anticipated update to the FiberSource QFX 150, the new RUSH FiberSource 1 is a powerful tool for illuminating fiber optic cables in permanent installations. With a new 78 W LED fiber projector, the RUSH FiberSource 1 boasts improved efficiency and reliability while retaining all the key features of its predecessor, such as nine interchangeable colors, a twinkle effects wheel, electronic dimming and DMX/stand-alone control.

    • 78 W LED fiber projector
    • 9 interchangeable colors
    • 0-100% electronic intensity control
    • 78 W LED fiber projector
    • 9 interchangeable colors
    • 0-100% electronic intensity control
    • Twinkle effect wheel
    • DMX or stand-alone control
    • Up to 300 fiber cables (1 mm)
    Physical Length: 305 mm (12.0 in.)
    Width: 210 mm (8.3 in.)
    Height: 200 mm (7.9 in.)
    Weight: 7.6 kg (16.8 lbs.)
    Dynamic Effects Color wheel: 9 interchangeable filters + open, indexing, continuous rotation
    Twinkle effect: Continuous rotation, variable speed and direction
    Dimmer: 0 - 100% continuous dimming
    Control and Programming Control options: DMX, standalone, master/slave
    DMX channels: 5
    Standalone programming: DIP switch
    Settings and DMX addressing: DIP switch
    DMX compliance: USITT DMX512/1990
    OpticsLight source: CREE 78 W LEDColor temperature: 6000–7000 KCRI (color rendering index): >70
    Minimum LED lifetime: 35 000 hours (to >70% luminous output)**Figure obtained under test conditions
    Construction Color: Black (RAL 9005)
    Housing: Steel and aluminum
    Protection rating: IP20
    Installation Mounting points: Four rubber-mounting grommets, two Ø13 mm holes for rigging clamps
    Location: Indoor use only, must be fastened to surface or structure
    Minimum distance to combustible materials: 0.2 m (7.9 in.)
    Minimum clearance around fans and vents: 0.1 m (4.0 in.)
    Orientation: Any
    Connections AC power in/out: Neutrik PowerConDMX data in/out: 3-pin and 5-pin locking XLR
    Electrical AC power: 100-240 V, 50/60 Hz
    Power supply unit: Auto-ranging electronic switch-mode
    Typical Power and Current 110 V, 60 Hz: 0.8 A, 87 W, PF 0.986230 V, 50 Hz: 0.5 A, 86 W, PF 0.909
    Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Thermal Cooling: Forced air (regulated, low noise)
    Maximum ambient temperature (Ta max.): 40° C (104° F)
    Minimum ambient temperature (Ta min.): 5° C (41° F)
    Maximum surface temperature, steady state, at 40° C ambient: 50º C (122° F)