Martin MAC Aura

  • Rental Rates

  • 1 Week $149.00
  • 2 Weeks $299.00
  • 4 Weeks $525.00

    The MAC Aura is the first compact LED moving head wash light with zoom that offers never-before-seen, eye-candy aura effects yet also functions as a highly capable single-lens wash with fully pre-mixed color. A ground-breaking optical system combines multicolor LEDs with backlight aura color mixing to produce an all new visual palette that takes the synthetic look out of LED for truly unique lighting designs.
    • Single-lens wash with fully premixed color
    • Broad color palette, RGBW color mixing
    • Uniform shades
    • 11 to 58° zoom
    • 3850 lm output
    • Aura eye-candy effects
    • Built-in FX engine
    • Rapid movement
    • High efficiency, low power consumption, long lifetime
    • Compact, low weight design (5.6 kg)


    Length: 302 mm (11.9 in.) across yoke
    Width: 302 mm (11.9 in.) across yoke
    Height: 360 mm (14.2 in.), head straight up
    Weight: 5.6 kg (12.3 lbs.) without accessories

    Dynamic Effects
    Beam color mixing: RGBW
    Aura (secondary lens array illumination) color mixing: RGB
    Beam color temperature control: CTO, variable 10 000 - 2500 K
    Beam and aura electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
    Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
    Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined
    Electronic dimming: Independent beam and aura, four dimming curve options
    Zoom: 11° - 58° (one-tenth peak angle)
    Pan: 540°
    Tilt: 232°
    Pan and tilt speed: Adjustable via onboard control panel and DMX

    Control and Programming
    Control options: Independent control of beam (primary output) and aura (secondary lens array illumination)
    Macro programs selectable via DMX: Synchronized beam and aura effects
    Control: DMX
    RDM: Implemented
    Control resolution: 8-bit, with 16-bit control of pan & tilt
    DMX channels: 14/25
    Setting and addressing: Control panel with backlit graphic display
    Protocol: USITT DMX512-A, ANSI/ESTA E1.20 RDM
    Transceiver: RS-485
    Fixture software update: Via DMX with Martin USB Duo DMX Interface

    Light source: Osram Ostar high-power emitters
    LED refresh rate: Beam 1220 Hz, aura 4395 Hz
    Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
    *Manufacturer´s figure obtained under manufacturer´s test conditions

    Photometric Data
    Total output: 3850 lumens (zoom at maximum)

    Color: Black
    Housing: High-impact flame-retardant thermoplastic
    Protection rating: IP20

    Mounting points: One M12 threaded hole for rigging clamp
    Location: Indoor use only, must be fastened to surface or structure
    Orientation: Any
    Minimum distance to combustible materials: 100 mm (3.9 in.)
    Minimum distance to illuminated surfaces: 200 mm (7.9 in.)

    AC power input: Neutrik PowerCon
    AC power throughput: Neutrik PowerCon
    DMX and RDM data in/out: 5-pin locking XLR

    AC power: 100-240 V nominal, 50/60 Hz
    Maximum total power consumption: 260 W
    Power supply unit: Auto-ranging electronic switch mode
    Main fuse: 5 AT (slow blow)
    Typical power consumption, all effects static, zero light output: <15 W

    Typical Power and Current
    100 V, 60 Hz: 236 W, 2.4 A, PF 0.994
    120 V, 60 Hz: 234 W, 2.0 A, PF 0.992
    208 V, 60 Hz: 229 W, 1.2 A, PF 0.970
    230 V, 50 Hz: 228 W, 1.1 A, PF 0.959
    240 V, 50 Hz: 228 W, 1.0 A, PF 0.953
    Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

    Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
    Maximum ambient temperature (Ta max.): 40° C (104° F)
    Minimum ambient temperature (Ta min.): 5° C (41° F)
    Total heat dissipation (calculated, +/- 10%): 880 BTU/hr.