Dimming

  • 1 Week $0.00
  • 2 Weeks $0.00
  • 4 Weeks $0.00
  • More details...

    The CEM3 facepanel immediately bridges the gulf of evaluation for an existing Sensor® user. Graphic displays show you the information you need on a large screen. One-button access for Setup, About, and Set Levels keep the curious user from accidentally making a change when checking the status of a dimmer. The number pad provides fast access to any circuit.     Improved connectivity & backup options USB quick-load provides storage and uploads of configurations and firmware upgrades. A secondary Ethernet port on the front panel becomes an uplink to the Net3™ lighting network. Two DMX ports maintain legacy hard-line support. Ride-thru and battery backup options for installation systems will allow the processor to stay booted through short-term power outages. A memory chip in each of the racks holds the full configuration for the rack to make module replacement easy.   The power of networking The plug-and-play features of CEM3 networking are a relief. Forget about past headaches of IP addresses and complicated setup instructions. Basic setup of the network is now as easy as a network switch and a few lengths of Cat5 cable. Building from extensive experience in networked lighting systems, ETC will soon offer software tools that tightly integrate power control, network gateways, control systems, and intelligent fixtures. Management, system health and circuit feedback are available to any network-connected device. The Sensor3 system continues the Sensor tradition of delivering premium performance and high value for all levels of users. And now with CEM3 in control, you can sit back and enjoy the tech sessions! ETC is committed to supporting customers over the long term. Any Sensor or Sensor+ system can be upgraded to CEM3 control. Contact your dealer about upgrading today. Product Features Graphical display and number pad reduce time spent on initial setup and local overrides Options exist for 16-bit control, source arbitration, preset backups, and hold last look Built-in data-loss protection and zero-setup controller-replacements make troubleshooting simple Network connections to the console provide remote management of setup, status, and control New three-in-one module for choice of dimming, relay, and constant for each circuit without changing module hardware

  • 1 Week $194.00
  • 2 Weeks $375.00
  • 4 Weeks $663.00
  • More details...

    World-class dimming performance, industrial-strength construction and an array of connection options make Sensor+ Portable Packs the professional choice for smaller touring shows, industrial rentals, compact video production, and rehearsal spaces. Sensor+ Portable Packs deliver built-in dimming features many installation racks would envy: modular design and magnetic circuit breakers. Add to that optional Advanced Features communication and remote monitoring options. Choose the control protocol you need, DMX or ETCNet2/ACN. Attach your load outputs to any industry-standard connector type. And quit worrying about the pounding that mobile productions dish out - Sensor+ Portable Packs are built to take it.   Features Available in 6 and 12 dimmer module configurations Accepts multiple input protocols Cam-Lok input connectors Pass through connectors available for SP6+ and SP12+ Multi-pin output configurations include Veam® VSC, Pyle National® and Socapex® Optional castered cart available CEM+ Control Electronics Module Supports Advanced Features option Supports Dimmer Doubling™   Ratings and Approvals UL and cUL Listed

  • 1 Week $313.00
  • 2 Weeks $594.00
  • 4 Weeks $1063.00
  • More details...

    How do top professionals dim touring stage shows, concert extravaganzas or remote broadcasts with the same quality as Broadway theaters do? With Sensor+ Touring Racks - the industry standard. In fact, 48 and 96 channel steel-framed Sensor+ Touring Racks are the standard in the market. Over 1,250 Sensor Touring Racks in the field have proved themselves the undisputed choice of professionals. Sensor+ Touring Racks feature high density modular design, magnetic circuit breakers, network communication and remote monitoring capabilities. Lighted patch bays and output panels plus flexible connectivity simplify setup. ETC touring line is complete with an aluminum frame 36-module rack, packing 72 dimmers into a lightweight case that is ready for the road.   Features Rugged design and construction based on years of road-tested performance Available in 24, 36, and 48 dimmer module configurations Up to 48, 72 and 96 20A dimmers Cam-Lok power input and pass-through connectors Multi-pin output configurations include Veam® VSC, Pyle National® and Socapex® Discreet Stage Pin, Twistlock, or Edison connectors (1 or 2 per dimmer depending on rack) Two or four patch outputs per channel Rack options include bump buttons, custom output panels, neutral patching, motor power, and moving light power Direct Ethernet control signal input as well as two DMX inputs Slots for spare CEM+ and/or dimmer modules Supports Advanced Features option Supports Dimmer Doubling™   Ratings and Approvals UL and cUL Listed

  • 1 Week $500.00
  • 2 Weeks $950.00
  • 4 Weeks $1713.00
  • More details...

    How do top professionals dim touring stage shows, concert extravaganzas or remote broadcasts with the same quality as Broadway theaters do? With Sensor+ Touring Racks - the industry standard. In fact, 48 and 96 channel steel-framed Sensor+ Touring Racks are the standard in the market. Over 1,250 Sensor Touring Racks in the field have proved themselves the undisputed choice of professionals. Sensor+ Touring Racks feature high density modular design, magnetic circuit breakers, network communication and remote monitoring capabilities. Lighted patch bays and output panels plus flexible connectivity simplify setup. ETC touring line is complete with an aluminum frame 36-module rack, packing 72 dimmers into a lightweight case that is ready for the road.   Features Rugged design and construction based on years of road-tested performance Available in 24, 36, and 48 dimmer module configurations Up to 48, 72 and 96 20A dimmers Cam-Lok power input and pass-through connectors Multi-pin output configurations include Veam® VSC, Pyle National® and Socapex® Discreet Stage Pin, Twistlock, or Edison connectors (1 or 2 per dimmer depending on rack) Two or four patch outputs per channel Rack options include bump buttons, custom output panels, neutral patching, motor power, and moving light power Direct Ethernet control signal input as well as two DMX inputs Slots for spare CEM+ and/or dimmer modules Supports Advanced Features option Supports Dimmer Doubling™   Ratings and Approvals UL and cUL Listed

  • 1 Week $719.00
  • 2 Weeks $1366.00
  • 4 Weeks $2444.00
  • More details...

    How do top professionals dim touring stage shows, concert extravaganzas or remote broadcasts with the same quality as Broadway theaters do? With Sensor+ Touring Racks - the industry standard. In fact, 48 and 96 channel steel-framed Sensor+ Touring Racks are the standard in the market. Over 1,250 Sensor Touring Racks in the field have proved themselves the undisputed choice of professionals. Sensor+ Touring Racks feature high density modular design, magnetic circuit breakers, network communication and remote monitoring capabilities. Lighted patch bays and output panels plus flexible connectivity simplify setup. ETC touring line is complete with an aluminum frame 36-module rack, packing 72 dimmers into a lightweight case that is ready for the road.   Features Rugged design and construction based on years of road-tested performance Available in 24, 36, and 48 dimmer module configurations Up to 48, 72 and 96 20A dimmers Cam-Lok power input and pass-through connectors Multi-pin output configurations include Veam® VSC, Pyle National® and Socapex® Discreet Stage Pin, Twistlock, or Edison connectors (1 or 2 per dimmer depending on rack) Two or four patch outputs per channel Rack options include bump buttons, custom output panels, neutral patching, motor power, and moving light power Direct Ethernet control signal input as well as two DMX inputs Slots for spare CEM+ and/or dimmer modules Supports Advanced Features option Supports Dimmer Doubling™   Ratings and Approvals UL and cUL Listed

  • 1 Week $25.00
  • 2 Weeks $48.00
  • 4 Weeks $85.00
  • More details...