Controllers

  • 1 Week $19.00
  • 2 Weeks $36.00
  • 4 Weeks $64.00
  • More details...

    The ADJ WiFLY WLC16 is a 19-inch rack mount, 16-channel DMX Controller with ADJ’s WiFLY, wireless DMX built-in. It allows users to control ADJ WiFLY compatible products wirelessly without the use of DMX cables. It has a built-in antenna that sends the wireless DMX signal to other WiFLY products. There is also a 3 pin XLR, DMX out onboard so that signals may also be sent via DMX cables to non-WiFLY products. The WiFLY WLC16 supports up to 16 fixtures each with up to 32 DMX channels, 30 banks of 16 programmable scenes each, and 6 programmable chases of 480 scenes each. Other features include a backlit digital display, SD card slot to save shows from the WiFLY WLC16 controller and a built-in microphone for sound triggering. Specifications: - 512 channel DMX Controller with ADJ’s WiFLY Transceiver Wireless DMX on-board - 16 fixtures, up to 32 channels each - 30 Banks of 16 programmable scenes - 6 Programmable chases of 480 scenes - 16 Sliders for manual control of channels - Auto mode controlled by speed and fade time sliders  - Master blackout function - 3-Pin XLR DMX out - Password Protection - Speed and Fade control - Tap Sync Speed / Sound trigger override - Built in microphone for sound triggering - Power failure memory - 16 x 2 character backlit digital display - On-board SD card slot (2GB SD Card is included. Supports up to 4GB max) - All programmed data is stored onto the SD card.  - Voltage Operation: DC12V 500mA min - Dimensions (LxWxH): 19” x 6.25” x 2.75” / 482 x 155 x 70mm (19-inch rack mount, 3.5 spaces) - Weight: 6 lbs. / 2.7 kg.

  • 1 Week $31.00
  • 2 Weeks $59.00
  • 4 Weeks $84.00
  • More details...

    The Enhanced2 Isolated Splitter [125EE] includes all the features of our standard models with added protection to meet the needs of harsh operating conditions. As with our standard splitters, all outputs are isolated from the input and from the other outputs by optical couplers. Every output has its own power supply and line driver. For protection against electrical storms, the 125EE adds four transient absorbers on the input, two on each output, and one on the power line. To protect against miswiring, it also has self resetting fuses on the DMX512 input and outputs that protect the splitter against damaging voltages up to 120 volts. Indicators on each output display power and termination status. Indicators on the input display signal present and valid DMX signal. The 125EE is designed to work on any voltage between 90 and 240 volts.

  • 1 Week $31.00
  • 2 Weeks $59.00
  • 4 Weeks $84.00
  • More details...

    The Enhanced2 Isolated Splitter [125EE] includes all the features of our standard models with added protection to meet the needs of harsh operating conditions. As with our standard splitters, all outputs are isolated from the input and from the other outputs by optical couplers. Every output has its own power supply and line driver. For protection against electrical storms, the 125EE adds four transient absorbers on the input, two on each output, and one on the power line. To protect against miswiring, it also has self resetting fuses on the DMX512 input and outputs that protect the splitter against damaging voltages up to 120 volts. Indicators on each output display power and termination status. Indicators on the input display signal present and valid DMX signal. The 125EE is designed to work on any voltage between 90 and 240 volts.

  • 1 Week $31.00
  • 2 Weeks $59.00
  • 4 Weeks $84.00
  • More details...

    The Enhanced2 Isolated Splitter [125EE] includes all the features of our standard models with added protection to meet the needs of harsh operating conditions. As with our standard splitters, all outputs are isolated from the input and from the other outputs by optical couplers. Every output has its own power supply and line driver. For protection against electrical storms, the 125EE adds four transient absorbers on the input, two on each output, and one on the power line. To protect against miswiring, it also has self resetting fuses on the DMX512 input and outputs that protect the splitter against damaging voltages up to 120 volts. Indicators on each output display power and termination status. Indicators on the input display signal present and valid DMX signal. The 125EE is designed to work on any voltage between 90 and 240 volts.

  • 1 Week $19.00
  • 2 Weeks $36.00
  • 4 Weeks $64.00
  • More details...

    ull; An affordable solution for controlling DMX products. • Assignable Joystick. • Changeable Pan/Tilt Option - Choose between built-in Joystick or optional Rotary Knobs (sold separately). • Pan/Tilt Fine button. • 192 DMX channels. • 12 Fixtures- 16 DMX channels each. • 30 programmable scene banks- 240 total programmable scenes. • 12 programmable chases. • 8 control faders. • Speed and Fade faders. • USB input for optional "USB Lite" or "USB MemStick". • Built-in microphone for sound trigger. • Line level RCA audio input for music trigger. • MIDI input for scene, chase or blackout trigger. • LCD display. • DMX polarity switch. • Power failure memory. • Tap Sync button for chase speed over-ride. • Fog Machine input and trigger button (compatible with select ADJ foggers: Fog Storm 1200 HD, Fog Storm 1700 HD, Vapor Flow & Vaporizer). • Compatible with select Antari foggers (Z-800, Z-1000 & Z-300 II). • RS-232 input. • Blackout button.

  • 1 Week $255.00
  • 2 Weeks $480.00
  • 4 Weeks $861.84
  • More details...

    DMX to Ethernet/Ethernet to DMX node with 8 fully programmable DMX ports and a dual port Gigabit switch. This comprehensively-featured node offers data splitting, merging, softpatching and backup when programmed using ELC’s freeware dmXLAN software application. Features include: DMX to Ethernet/sACN & Ethernet/sACN to DMX conversion  Remote programming and monitoring using ELC dmXLAN freeware DMX input options: normal or backup DMX output options: normal, merging in HTP, LTP, channel custom, priority merging, full softpatch (channel by channel), programmable merging with DMX channel control Remote capture and control of fixture parameters Local control via backlit display and rotary encoder/selector pushbutton Support for WYSIWYG, ESP, Capture

  • 1 Week $235.00
  • 2 Weeks $445.00
  • 4 Weeks $798.00
  • More details...

    8/2 Port DMX / Ethernet interface with enhanced merging and control. dmXLAN node 8 is our top of the range DMX to ethernet and ethernet to DMX node. It features 2x fixed DMX inputs & 8x DMX inputs/outputs ports, fully compatible with our free dmXLAN software with advanced DMX channel merging & patching. It also works perfect as a standalone DMX toolbox. Features: Remote programming and monitoring DMX input options like Normal and Backup DMX output options like: Normal Merging in HTP / LTP or custom Priority merging Merging with softpatch Remote takeover of fixture parameters Visualizer input supports softwares like WYSIWYG / ESP / Capture / and many others Connections: 10/100 mBit Ethernet connection on Neutrik Ethercon 8x BiDirectional DMX ports on Female XLR5-pin. Can be used for DMX output, DMX input or DMX output with RDM 2x DMX input ports on Male XLR5-pin Midi In/Out RS232 4x Contact closure Input (for calling up configurations)

  • 1 Week $195.00
  • 2 Weeks $405.00
  • 4 Weeks $780.00
  • More details...

    6-Port DMX / Etnernet node with integrated 5-port Switch   dmXLAN node6x is our top all in one DMX / Ethernet solution. It features 6x DMX inputs/outputs ports , fully compatible with our  free dmXLAN software with advanced DMX channel merging & patching. And a 5-port 10/100MBit Ethernet switch.  It also works perfect as a standalone DMX toolbox.   Features:   Remote programming and monitoring   DMX input options like Normal and Backup   DMX output options like:   - Normal   - Merging in HTP / LTP or custom   - Priority merging   - Merging with softpatch   Remote takeover of fixture parameters   Visualizer input supports softwares like WYSIWYG / ESP / Capture / and many others   Connections:   3x 10/100 mBit Ethernet connection on Neutrik Ethercon (Front)   2x 10/100 mBit Ethernet connection on RJ45 (Back)   6x BiDirectional DMX ports on Female XLR5-pin. Can be used for DMX output, DMX input       or DMX output with RDM (Front) Also available in Full Isolated (-FI) versio

  • 1 Week $119.00
  • 2 Weeks $213.00
  • 4 Weeks $406.00
  • More details...

    The 1915L touchmonitor is designed, developed and built to provide the most cost-effective touch solutions for system integrators and VARs. It packs Elo quality and reliability into an integrated, affordable touchmonitor.This compact touchmonitor is "designed for touch" from the ground up, with Elo expertise and reliability built in-not added by altering an existing monitor. The 1915L desktop LCD touchmonitor is available with a choice of Elo's AccuTouch five-wire resistive, or IntelliTouch surface wave touch technologies, plus a dual serial/ USB touch interface. The monitor is factory sealed against dust, dirt, and liquid splashes. The 1915L can be used in a wide variety of environments because it registers input from a finger, gloved hand or soft stylus with a fast and accurate response. Entry-level monitor with Elo quality "Designed for touch" features such as a stable tilt stand Long-lasting product cycle Available with IntelliTouch Surface Wave Technology, or AccuTouch Five-Wire Resistive Technology Sealed touchscreen Dual serial/USB interface Removable stand and VESA mounting option Mounting holes on stand bottom for tabletop security Controls on the side rather than the front, plus lockout function for public use Digital on-screen display (OSD) Worldwide agency approval

  • 1 Week $235.00
  • 2 Weeks $445.00
  • 4 Weeks $798.00
  • More details...

    The Datagate is an extremely flexible bridge between control and fixtures/dimmers. It can form the backbone of a network, provide optical isolation merge levels from multiple streams, and translate between DMX and Ethernet protocols. The Datagate is the cornerstone of any DMX network. It can be: DMX Hub/Splitter DMX Merger (HTP or LTP) DMX -> Ethernet Ethernet-> DMX Or any combination of the above The Datagate has 10 profiles, each profile reconfigures it to perform a specific task, the Datagate comes with factory profiles. Features The Datagate can be DMX Hub/Splitter DMX Merger (HTP or LTP) DMX -> Ethernet Ethernet-> DMX or any combination of the above. Input/Output 8 DMX ports (input or output) 1 Ethernet port 1 RS232 input for configuration Profiles may be selected and viewed with front panel menus or with Web Browser over Ethernet Configuration and editing of Profiles may be done either with free Node Management Utility or through menu buttons. LCD display supports menu navigation and provides status information on port direction, and data flow Routing Engine supports Copy Merge HTP Merge LTP (switched by block, not by channel, with max 8 governing rules ) Rack mountable (19” x 1U) Internal power supply The Datagate DE & DME also includes LightFactory Limited Edition Profiles DMX Hub 4Way Isolator 7 to 1 HTP Merger DMX -> Ethernet Ethernet -> DMX Artnet The user can also create their own profiles to make the datagate perform how ever he/she wants. With the flick of a switch the Datagate can become a completely different product, thus replacing many devices such as DMX hubs, mergers, or DMX/Ethernet converter boxes with one single unit. Profiles are edited using the ENTTEC NMU (Node Management Utility) The Datagate has 8 input or output DMX ports, and supports up to 8 DMX over ethernet universes (channels). When a DMX port is configured as an input simply plug in the gender changer into the required port. Port 8 has both connectors male and female.

  • 1 Week $0.00
  • 2 Weeks $0.00
  • 4 Weeks $0.00
  • More details...

    The Open DMX Ethernet (ODE) is a single port DMX to Ethernet node that can be configured as either an input or an output via Ethernet via a simple software utility. It is compatible with ESP and Art-Net DMX over Ethernet protocols. Born from the Open DMX USB and DMX USB PRO, the ODE is the industry's first affordable DMX Ethernet gateway. Out of the box, the ODE is configured as an Art-Net output node on universe 0:0 but can be easily and quickly changed using the free NMU tool. This means there are no dip-switches or thumb wheels to worry about on the ODE. The ODE is perfect for distributing DMX signals over Cat5 in a cost effective manner or with wireless ethernet systems. Features 10/100 Ethernet port Supports Artnet and ESP 1 Input & 1 Output connector (not simultaneous use) Status, Direction and Link leds Ethercon connector 7V DC jack ARM 32bit Processor Upgradeable firmware

  • 1 Week $91.74
  • 2 Weeks $174.31
  • 4 Weeks $337.62
  • More details...

    ColorSource® consoles provide hands-on control designed for the latest technology. These affordable, portable desks specialize in streamlined, plug-and-play setup; the onboard fixture library makes traditional patching easy, and the console has the ability to recognize RDM-capable devices in the rig and auto-populate them in patch. Simply use the on-board touchscreen to drag each fixture into place on a customizable stage map, and you’ll be programming in minutes. Whether you’re recording cues or working on the fly, these consoles you covered, with faders that can be used to play back looks and effects or to mix the perfect color in your LED lights.

  • 1 Week $290.00
  • 2 Weeks $550.00
  • 4 Weeks $995.00
  • More details...

    It's like having two consoles in one . With ETCnomad Puck, you don't have to choose between the Cobalt® and Eos®/Element™ families, because it runs both platforms. A small but powerful control device, Puck has two HDMI video ports (DVI adapters can be used if needed), one network port and three USB ports. This is a Windows 7 unit; as such, multi-touch displays are supported.   A hat trick of control . ETCnomad Puck can serve as a primary, backup or client device, and it can also work offline. Compatibility Eos family: Note that Net2 protocol is not supported. Supported protocols include Net3/ACN/sACN and ArtNet Net3 DMX/RDM Gateways Show Control Gateway I/O Gateway ETC Gadget USB-to-DMX converter (only one may be connected at this time and RDM is not supported) iRFR, iRFR Preview and aRFR Radio Focus Remote Universal Fader Wing When you use ETCnomad Puck as a primary or backup, the system output is determined by the device with the lowest output configuration. When it's connected as a client, ETCnomad Puck's output capacity of is ignored. Cobalt family: Supported protocols include Net3/ACN/sACN and ArtNet Note that Net2 protocol is not supported. Net3 DMX/RDM Gateways Show Control Gateway I/O Gateway ETC Gadget USB-to-DMX converter (only one may be connected) iRFR, iRFR Preview and aRFR Radio Focus Remote Universal Fader Wing Third-party USB-MIDI panels via Direct MIDI When you use ETCnomad Puck as a primary or backup, the system output is determined by the device with the highest output configuration. Only the number of outputs purchased will be backed up in case of a failover. When it's connected as a client, ETCnomad Puck's output capacity is ignored. ETCnomad Puck's functionality comes from the application in use. To find out what features are supported and to see user-interface descriptions, check out the Cobalt, Eos-family and Element documentation.

  • 1 Week $0.00
  • 2 Weeks $0.00
  • 4 Weeks $0.00
  • More details...

    The Preset 10 Portable [PRE10P] can act as a backup for any DMX512 lighting console or as a stand-alone DMX512 preset console. The PRE10P is a DMX512 playback device that can take up to ten snapshots from a DMX console and play them back at the press of a button. Fade times can be set from 0 to 999 seconds (default is 2 seconds). Each PRE10P can work in conjunction with a lighting console, automatically switching between preset and console control. When the console generates DMX, the PRE10P goes off-line, and the console operates normally. Upon loss of DMX from the console, the PRE10P either returns to its previous preset or holds the last look (jumper selectable).

  • 1 Week $154.00
  • 2 Weeks $290.00
  • 4 Weeks $565.00
  • More details...

    With the increasing requirements of clients and designers in both fixed installations and events/concerts, the need for sophisticated solutions for signal transportation and data distribution is inevitable. Also, latest technical developments and requirements have to be met. The MA 8Port Node, MA 4Port Node,MA 4Port Node WM (Wall Mount), MA 2Port Node, MA 2Port Node WM (Wall Mount) set an additional benchmark in MA Lighting’s networking product range as they feature the 1Gbit/s bandwidth capability. They allow the conversion of Ethernet data into DMX or vice versa and fit perfectly into the grandMA2 system and its MA-Net2 protocol, which is based on this high speed to ensure maximum performance. Optimised for touring and installation purposes, all products have a rugged steel housing for a long life even under harsh conditions. The Nodes offer a menu button, a USB connector and a 2" colour TFT as well as LEDs displaying the current status. All of these ensure a comfortable operation. The MA xPort Nodes are fully configurable from the grandMA2 consoles or from grandMA2 onPC. To achieve the highest flexibility, each DMX port can be individually configured as DMX in or DMX out. Furthermore all MA xPort Nodes are available as an onPC version to provide parameters for standalone onPC stations (for more details see: MA onPC solutions). The MA 2Port Node is the perfect solution for converting a small amount of DMX universes at the same location. The MA 2Port Node is available in different fittings for adapting to multiple applications. First there is the basic version based on a 9"/1HU housing, where all connectors are located on the back. Additionally an add-on fitting is available to mount this basic version into a 19" rack. Second a special fitting can be used where all connectors on the back of the MA 2Port Node are mirrored on an additional front panel for an easier access when rackmounted. Third possibility is to combine two MA 2Port Node for rack use by adding rack mounting brackets and a special threaded fastener between the two single MA 2Port Node units. Fourth option is the additionally available rigging plate for mounting couplers or clamps on the MA 2Port Node. The two DMX outputs as well as the main switch, one powerCON and one etherCON connector are located at the rearside of the Node. Speaks MA-Net2, Art-Net and sACN via 1Gbit/s connection Fully configurable from a grandMA2 console/grandMA2 onPC 2" colour TFT display Rugged steel housing for flexible use or mobile applicatio

  • 1 Week $450.00
  • 2 Weeks $900.00
  • 4 Weeks $1800.00
  • More details...

    Real-time calculation for up to 65,536 parameters with a grandMA2 system (up to 256 DMX universes) 4,096 HTP-/LTP-parameters (8 x DMX out) 1 internal command screen (7”) 1 Ethercon connector 4 USB2.0 connectors grandMA ‘series1’ compatible mod   The MA NPU (Network Processing Unit) unites the calculation power in the network and offers the same CPU power as the grandMA2 consoles. The MA NPU can handle 4,096 parameters.    With an easy to read touchscreen the MA NPU allows intuitive use and easy access to all the important information. 8 x DMX XLR 5-pin connectors on the back the MA NPU allow a most flexible use within the network environment.   The MA NPU (Network Processing Unit) is the link between the Ethernet and DMX controlled devices. It’s also possible to use the MA NPU for additional control applications; its full capabilities become visible when operated in the MA-Net2. For decentralised DMX networks, the MA NPU converts the incoming Ethernet data into DMX512-A data. The data conversion supports MA-Net and MA-Net2. The converted data are transmitted via 8 independent DMX connectors, which can also be configured as DMX inputs.   In a network, several consoles share the available MA NPUs. This allows DMX devices being used by several consoles together and provides a redundant mode of operation without additional components such as DMX mergers.  Any MA NPU connected to grandMA2 onPC enables the software to send “real” DMX data. This converts grandMA2 onPC into a full-featured lighting control system with up to 4,096 parameters.

  • 1 Week $406.00
  • 2 Weeks $773.00
  • 4 Weeks $1381.00
  • More details...

    Real-time control for 2,048 parameters in combination with grandMA2 onPC (up to 65,536 parameters as backup in the MA system)  Command section similar to grandMA2 layout 2 A/B faders (100mm); main executor Level-Wheel - dimmer Individually backlit and dimmable silent (clickless) keys Light, handy and rock solid, only 6kg Plug & Play: simply connect to your notebook Integrated universal power supply Ergonomic design   The MA onPC command wing paves the way for mobile use of the highly flexible and powerful grandMA2 control system. In combination with the free of charge grandMA2 onPC software, the MA onPC command wing is a portable 2,048 parameter control solution that can be used in nearly any location – and all for an affordable price. Designed as the perfect hardware expansion to the grandMA2 onPC software, the MA onPC command wing enables the look and feel of the software to be as close to a real grandMA2 console as possible. Thanks to the MA onPC command wing - incorporating the command section of the grandMA2 consoles - it has never been easier to use the grandMA2 onPC software. With a simple USB connection between the MA onPC command wing and the computer running the grandMA2 onPC software, all inputs and outputs of a grandMA2 console are available to the user. DMX, Midi, Timecode and Analogue Remote are all on hand directly at the MA onPC command wing.  Wherever it is physically difficult to use a grandMA2 console, the MA onPC command wing, in conjunction with the grandMA2 onPC software, enables the customer to program or playback within the grandMA2 world. Therefore the MA onPC command wing is ideal to be used as a backup solution within the grandMA2 system, as powerful control solution on the road or for smaller theatres, shows and clubs or for pre-programming. The MA onPC command wing is available from March 2012

  • 1 Week $1300.00
  • 2 Weeks $2535.00
  • 4 Weeks $4815.00
  • More details...

    The new signature console of MA Lighting is the grandMA2 full-size. It controls all kinds of lighting genres like conventionals, moving lights, LEDs, video and media. Equipped with the most up-to-date technology and even some special tools (e.g. keyboard drawer or multi-touch command screen) the grandMA2 full-size is at home in all lighting segments. Intuitive and fast control over all connected fixtures and channels in different styles is self-evident. Furthermore the newly developed faderwing provides in addition up to 60 xecutor faders over almost unlimited amount of pages. Moreover the grandMA2 full-size can read series 1�-showfiles and is able to run in a special �series 1�-mode. That means full compatibility with �series 1�-sessions. All command keys within the new series can be found in the same place for easy operation. The grandMA2 offers a highly flexible and comfortable way of programming, including nearly infinite numbers of presets, cues, pages, sequences and effects. Real-time control for 65,536 parameters per session in connection with MA NPUs (up to 256 DMX universes) 8,192 HTP -/LTP-parameters built in (6 x DMX out) 3 internal TFT wide mode touchscreens (15,4� WXGA) 2 external TFT screens (UXGA, can be touchscreens) 1 internal command screen � multi-touch (9� SVGA) 30 motorized executor faders Built in keyboard drawer Built in UPS 2 Ethercon connectors 5 USB 2.0 connectors Motorized monitor wing 2 motorized A/B fader 100mm Individually backlit and dimmable, silent key

  • 1 Week $826.00
  • 2 Weeks $1568.00
  • 4 Weeks $2817.00
  • More details...

    Real-time control for up to 65,536 parameters per session in connection with MA NPU (equivalent to 256 DMX universes) 4,096 HTP-/LTP parameters 6 DMX outputs 2 internal TFT wide mode touchscreens (15.4" WXGA) 2 external TFT screens can be connected (UXGA, touchscreens accepted) 1 internal command screen – multi-touch (9" SVGA)* 15 motorized executor faders Integrated keyboard drawer Built-in uninterruptible power supply (UPS) 2 Ethercon connectors 5 USB 2.0 connectors Motorized monitor wing 2 motorized A/B fader (100mm) Individually backlit and dimmable silent (clickless) keyThe grandMA2 light has 4,096 parameters, 15 motorized executor faders and two touchscreens available. All further features and controls are identical to those on the grandMA2 full-size.  The grandMA2 light is the perfect tool to control all kinds of lighting genres like conventionals, moving lights, LEDs, video and media and supplies an intuitive and fast control of all connected fixtures and channels. The grandMA2 light can handle an almost infinite number of presets, cues, pages, sequences and effects. It is ideally suited as a backup device for the grandMA2 full-size. Furthermore the console is compatible to the grandMA ‘series 1’.

  • 1 Week $406.00
  • 2 Weeks $773.00
  • 4 Weeks $1381.00
  • More details...

    The Hog range just got broader. HedgeHog 4 and 4 Network are the littlest of the range and still pack quite a punch running the same software as all the other Hogs. Both come with ArtNet and CITP capabilities and are designed for small to mid level shows. They are compact, lightweight and easy to take on a plane! Running on Linux, they are fast, stable and ready to Hog. Whether being used in a school theatre, nightclub, corporate event, medium scale rental job or church, they are the perfect consoles. Retaining the same programming layout as their larger brother, the Road Hog 4, as well as being able to load showfiles from any of the range (and vice versa) means that this compact console range is extremely flexible and easy to use. HedgeHog 4N will, in addition to the above, make a perfect remote focus and dimmer city console, with its ability to network with the bigger hogs in the fleet!   Features Robust Hog 4 Operating Software Unlimited number of simultaneous crossfades One internal 12-inch wide touch screen 4 encoders for an expanded wheelset Twelve User Keys Ten playback faders Two fixed universes of DMX 512 and up to 4 universes of DMX 512 over ArtNet or sACN Hog-Net Ethernet connector (on on HedgeHog 4N) Fixture-Net Ethernet connector Internal hard disk drive Two USB ports One Desklight Auto-ranging mains input (90-250VAC) Dust cover included Optional Custom Road Case Connectivity MIDI Input and Output, MIDI Show Control and MIDI Time Code via optional external widget Supports USB playback and Master Wings Dimensions 20.74” (526.8mm) wide by 21.83” (554.37mm) deep by 3.97” (100.78mm) high Weight: 17 lbs (7.7kg)

  • 1 Week $350.00
  • 2 Weeks $660.00
  • 4 Weeks $1275.00
  • More details...

    The DMX Processor 8000 adds extraordinary DMX processing capabilities to the Wholehog line. With no compromise to Flying Pig Systems’ exacting standards, its longevity, quality and innovation are assured to set new standards. The Wholehog DMX processor 8000 provides the output power for Wholehog systems. The Wholehog Operating System doesn't limit you to a fixed number of DMX channels - just add as many DMX processor 8000s as needed (along with an Ethernet switch) to supply the specified number of DMX universes for the production or installation. With an unprecedented amount of computing power, the DMX Processor 8000 manages 16 DMX universes with ease while expanding the power and reliability of the Wholehog control system as a whole. By providing standard XLR, Art-Net, and E1.3.1 (sACN) output at a steady rate, the possibilities for lighting design are truly endless with the DMX Processor 8000.  Features Eight 5-pin XLR DMX 512 outputs Expandable to 16 via USB Expander or Widgets 16 universes of DMX via Art-Net and E1.3.1 (sACN) output Powerful distributed processing of cross-fades and effects Local interface with LCD screen and buttons for configuration and testing DMX status and test facilities All functions are configurable remotely Firmware remotely upgradeable over network Specifications 2.0 GHz Intel Dual Core processor with 1 GByte RAM and 1 GByte Flash Gigabit ethernet Dual Ether-Con connectors (Hog-Net and Art-Net) White LED backlit graphic LCD for graphical user interface Comprehensive LED status feedback Connectors: 8 5-pin XLR, 1 EtherCon for Hog-Net, 1 EtherCon for Art-Net, 2 USB-A Auto-ranging mains input (90-250V AC) Locking IEC connector Precision machined Aluminium panel with wear-resistant anoprinted legends 1U 19" rack unit, 11" deep Kensington Security Slot Compatible with Wholehog 3, Road Hog Full Boar, Hog iPC, Hog 3PC

  • 1 Week $144.00
  • 2 Weeks $275.00
  • 4 Weeks $488.00
  • More details...

    Packaged in a sleek, blue anodized oval package, the USB DMX Super Widget provides four universes of DMX 512 output from any USB enabled Windows PC.   When used in conjunction with Hog 3PC software, up to 2 DMX Super Widgets may be connected at once via a USB Hub to provide 8 full universes of DMX 512. This configuration provides an excellent solution for backup and playback only applications. By adding Wholehog Programming, Expansion and Playback Wings, users can configure powerful control solutions that precisely suit their needs and budgets. The USB DMX Super Widget is also fully compatible with the classic Hog 2PC application.   USB connection to Road Hog Full Boar console, Hog iPC console or Hog 3PC computer Four DMX 512 outputs on 5-pin XLR connectors 2048 channels total output capacity Up to two units can be connected via a USB Hub Rugged, sleek black metal package that can be stacked Status LEDs for power and data in/out Kensington Security Slot One USB input connector External power supply included

  • 1 Week $63.00
  • 2 Weeks $113.00
  • 4 Weeks $206.00
  • More details...

    When used in conjunction with a Wholehog 3 console, Road Hog console, or Hog 3PC software, the LTC Widget provides a powerful level of timecode functionality. This configuration provides an excellent solution for backup and timecoded playback-only applications. In addition, the MIDI in/out/thru allow direct connection of MIDI for show control and backup purposes.   USB connection to Wholehog 3 console, Road Hog console, or Hog 3PC computer Single Linear Timecode input on 3 pin XLR connector MIDI Input, Output, and Thru supports MIDI, MIDI Show Control and MIDI Time Code Rugged, black metal package that can be stacked Status LEDs for power, timecode status, and MIDI Kensington Security Slot One USB input connector Fully powered via USB port

  • 1 Week $133.00
  • 2 Weeks $253.00
  • 4 Weeks $451.00
  • More details...

    The Wholehog 3 Playback Wing provides additional playback capabilities for Wholehog 3 Console, Hog iPC Console, or Hog 3PC software. It uses the same high quality controls as found on the Wholehog 3 console, ensuring responsive and reliable operation. A connection is provided for a Wholehog 3 LED desklight (supplied), fully dimmable and software controllable. Styled in a similar manner to the Wholehog 3 console, the Playback Wing is equally at home connected to a laptop, a desktop PC, a Hog iPC console or a Wholehog 3 console. In addition, the Playback Wing is fully compatible with the classic Hog 2PC application. A custom made flightcase is available to protect your investment. Features USB connection to host computer, Hog iPC console or Wholehog 3 console Internal USB hub supporting two external devices Socket for a Wholehog 3 LED desklight (supplied), fully dimmable Full Wholehog 3 playback masters, identical to those on the console Multiple playback wings can be connected to the Wholehog 3 console or Hog 3PC software Rugged, sleek anodized blue casing Status LEDs for power, hub status and data in/out Specifications One type B USB input socket Two type A USB output sockets, available when using external power supply Socket for Wholehog 3 LED desklight (supplied) for when using an external power supply Socket for external 12V power supply (supplied) Support for both bus-powered and self-powered operation 10 masters, each with Choose, Go, Halt and Flash buttons and a Penny & Giles fader Next Page, Assert, Release, Skip Forwards, Skip Backward and Pig buttons Bi-colour LEDs and desklight are software-dimmable Status LEDs for power, hub status and data in/out

  • 1 Week $406.00
  • 2 Weeks $773.00
  • 4 Weeks $1381.00
  • More details...

    Coupled with Hog 4 PC, the Nano Hog 4 provides the user with a single unified surface, turning a laptop or desktop into a fully fledged, powerful and intuitive lighting console. Any PC running Hog 4 PC can connect to the Nano Hog 4 over USB creating a state of the art control surface. Utilizing the same front panel as the Road Hog 4, users will immediately feel at home on the Nano Hog 4. There are also two slots for the optional addition of either Super Widgets and/or MIDI/LTC Widgets.    Features USB connection to Hog 4 PC 2 x Widget Expansion slot provides up to 8 DMX outputs and/or 2 MIDI/LTC inputs from PC based products (when optional Widgets are installed) Socket for a Hog LED desklight (supplied), fully dimmable LED Desklight and feedback LEDs dimmable Sleek Road Hog 4 styling Status LEDs for power, data, and expansion Two USB sockets Auto-ranging mains input (90-250VAC) Dust cover included 4 encoders Twelve User Keys Ten playback faders Auto-ranging external PSU mains input (90-250VAC) Dust cover included Optional Custom Road Case Dimensions 26.7” (678.18mm) wide by 13.76” (349.52mm) deep by 3.54” (89.85mm) high Weight: 18.1 lbs (8.21 kg)

  • 1 Week $695.00
  • 2 Weeks $1320.00
  • 4 Weeks $2360.00
  • More details...

    A console capable of delivering everything from a local theatre show to a stadium gig! All the power of the Hog 4 in a more compact package, with sleek lines, raked screens and familiar layout. Like it’s predecessor it allows for total expansion enabling you to create, manage, edit and playback all types of shows. The Full Boar 4 comes packed with the latest hardware features - 10 point multi touch, motorized faders, solid state HDD to name a few. Features Robust Hog 4 Operating Software Unlimited number of simultaneous crossfades Two internal 15.6-inch wide screen touchscreens with 10 point multi touch Two external monitors or touchscreens supported Five encoders for an expanded wheelset Twelve LCD User Keys Tri Axis backlit trackball, with rotary encoder for the third axis and four configurable buttons for cursor and position control Ten motorized playback faders One motorized Grand Master Four fixed universes of DMX 512 and up to 12 universes of DMX 512 over ArtNet or sACN Hog-Net Ethernet connector Fixture-Net Ethernet connector Internal Solid State Hard disk drive Five USB ports for Wholehog wings and external touchscreens Desklights, feedback LEDs, and integrated worklight all dimmable Auto-ranging mains input (90-250VAC) Light Converse Visualizer dongle included Dust cover included Custom road case included Connectivity Unlimited number of DMX channels via Ethernet DPs Unlimited number of Art-Net and E1.3.1 (sACN) universes via Ethernet DPs Onboard MIDI Input and Output, MIDI Show Control and MIDI Time Code and LTC input Multiple LTC inputs via multiple SMPTE/ LTC USB Widgets Connectivity with many visualizers via Ethernet Wired and wireless networking ability with multiple Wholehog console systems Remote Focus capabilities when networked with a tablet PC running Hog 4PC software Supports USB Playback and Expansion Wings Dimensions 35.49” (901.19mm) wide by 22.65” (575.36mm) deep by 9.62” (244.34mm) high Weight: 45 lbs (20.41 kg)

  • 1 Week $63.00
  • 2 Weeks $119.00
  • 4 Weeks $213.00
  • More details...

    When used in conjunction with Hog 3PC software, up to eight DMX Widgets may be connected at once via a USB Hub to provide 8 full universes of DMX 512. This configuration provides an excellent solution for backup and playback only applications. By adding Wholehog Programming, Expansion and Playback Wings, users can configure powerful control solutions that precisely suit their needs and budgets.  The USB DMX Widget is also fully compatible with the classic Hog 2PC application.   USB connection to Road Hog Full Boar console, Hog iPC console or Hog 3PC computer Single DMX 512 output on 5-pin XLR connector 512 channels total output capacity Up to eight units can be connected via a USB Hub Rugged, sleek metal package that can be stacked Status LEDs for power and data in/out Kensington Security Slot One USB input connector Fully powered via USB port

  • 1 Week $826.00
  • 2 Weeks $1568.00
  • 4 Weeks $2817.00
  • More details...

    The Hog 4 is the flagship in our newest range of consoles. Replacing the much loved Wholehog III, it embraces the latest technology, while retaining the Hog’s familiar control surface. Users will be able to walk up to the Hog 4 and start programming without having to learn a whole new interface. The new encoders, jog shuttle wheel, lcd keys, motorized faders and integrated keyboard all serve to enhance this experience, making the Hog 4 completely customizable. You can now have virtually all the most important attributes to hand at any time. Retaining the sleek look of generations past, the Hog 4 offers the user an advanced programming experience in an established environment. The Hog 4 console, at the top of the Hog line, is designed to handle the largest shows. The console provides three monitor outputs, MIDI input and output ports, 8 USB ports, 2 Fast Ethernet ports on a rugged Neutrik Ethercon connector allowing you total flexibility. You’re prepared for everything from the smallest industrial job requiring a single console to the largest stadium show, theme park installation or Broadway spectacular requiring a multi console setup with full network backups! Preserve show data on a solid state hard disk drive as well as with USB drives and CD/DVD-ROM’s, or alternatively connect directly to a network drive to store your show files remotely. Features Robust Hog 4 Operating Software Unlimited number of simultaneous crossfades Two internal 17-inch wide screen touchscreens with 10 point multi-touch Three external monitors or touchscreens supported Five encoders for an expanded wheelset Twelve LCD User Keys Tri Axis backlit trackball, with rotary encoder for the third axis and four configurable buttons for cursor and position control Ten motorized playback faders One motorized Grand Master Dedicated Intensity and Rate wheels User assignable Jog Shuttle encoder 48 Soft-Keys for quick toolbar selections Built in DMX Processor 8000 Hog-Net Ethernet connector Fixture-Net Ethernet connector Integrated keyboard Internal Hard disk drive Internal CD/DVD drive Eight USB ports for Wholehog wings and external touchscreens Storage space beneath arm rest Desklights, feedback LEDs, and integrated worklight all dimmable Auto-ranging mains input (90-250VAC) Light Converse Visualizer dongle included Dust cover included Custom Road Case included Connectivity Unlimited number of DMX channels via Ethernet DPs Unlimited number of Art-Net and E1.3.1 (sACN) universes via Ethernet DPs Onboard MIDI Input and Output, MIDI Show Control and MIDI Time Code and LTC Input Multiple LTC inputs via optional multiple SMPTE/ LTC USB Widget Connectivity with many visualizers via Ethernet Wired and wireless networking ability with multiple Wholehog console systems Remote Focus capabilities when networked with a tablet PC running Hog 4PC software Supports USB Playback and Expansion Wings Dimensions With the Screen down - 40.5” (1028.7mm) wide by 28.49” (723.7mm) deep by 6.49” (164.75mm) high With the Screen up - 40.5” (1028.7mm) wide by 28.49” (723.7mm) deep by 16.43” (417.39mm) high Weight- 75 lbs (34 kg)

  • 1 Week $160.00
  • 2 Weeks $300.00
  • 4 Weeks $585.00
  • More details...

    The Master Wing 4, with its evolutionary styling is equally at home next to a console or as part of a Hog 4PC system. It provides 30 additional faderless playback capabilities for the Hog 4, Full Boar 4, Road Hog 4 and Hog 4 PC software. It uses the same high quality controls as found in the Hog 4 range of consoles, ensuring responsive and reliable operation. One Hog LED desk light is supplied, fully dimmable and software controllable.  A 15.6 inch widescreen with 10 point multi touch is integrated in the wing allowing you to expand your console or PC system using one integrated unit. Features 30 faderless masters each with Choose, Go and Flash Buttons 15.6 inch widescreen with multi touch Master Choose column and Next and Back Page buttons USB connection to Hog 4, Full Boar 4, Road Hog 4 and Hog 4 PC Super Widget Expansion slot provides four DMX outputs from PC based products (when optional Super Widget is installed) Socket for a Hog LED desklight (supplied), fully dimmable LED Desklight and feedback LEDs dimmable Sleek Road Hog 4 styling Status LEDs for power, data, and expansion Two USB sockets Auto-ranging mains input (90-250VAC) Dust cover included Optional Road Case available Dimensions 20.14” (511.56mm) wide by 24.02” (610.05mm) deep by 9.62” (244.34mm) high Weight: 27.2 lbs. (12.33 kg)

  • 1 Week $185.00
  • 2 Weeks $350.00
  • 4 Weeks $675.00
  • More details...

    The Playback Wing 4, with its evolutionary styling is equally at home next to a console or as part of a Hog 4PC system. It provides 10 additional faders plus one Grand Master, all motorized, for the Hog 4, Full Boar 4, Road Hog 4 and Hog 4 PC software. It uses the same high quality controls as found in the Hog 4 range of consoles, ensuring responsive and reliable operation. One Hog LED desk light is supplied, fully dimmable and software controllable. A 15.6 inch widescreen with 10 point multi touch is integrated in the wing allowing you to expand your console or PC system using one integrated unit. Features Ten motorized playback masters One motorized Grand Master 15.6 inch widescreen with multi touch Master Choose column and Next and Back Page buttons USB connection to Hog 4, Full Boar 4, Road Hog 4 and Hog 4 PC Integrated touchscreen controls Super Widget Expansion slot provides four DMX outputs from PC based products (when optional Super Widget is installed) Socket for a Hog LED desklight (supplied), fully dimmable LED Desklight and feedback LEDs dimmable Sleek Road Hog 4 styling Status LEDs for power, data, and expansion Two USB sockets Auto-ranging mains input (90-250VAC) Dust cover included Optional Road Case available Dimensions 20.14” (511.56mm) wide by 24.02” (610.05mm) deep by 9.62” (244.34mm) high Weight: 27.6 lbs (12.51 kg)

  • 1 Week $744.00
  • 2 Weeks $1413.00
  • 4 Weeks $2538.00
  • More details...

    The Wholehog Expansion Wing provides additional playback capabilities for the Wholehog 3 Console, Hog iPC Console, Road Hog consoles or Hog 3PC software. It uses the same high quality controls as found on the Wholehog 3 console, ensuring responsive and reliable operation. Two Wholehog LED desklights are supplied, fully dimmable and software controllable. Bright LCD displays clearly indicate playback bar data in relation to each master.   One Expansion Wing adds 40 playbacks to any Wholehog system: 20 playbacks each include Choose, Go, Halt and Flash buttons as well as a Penny & Giles fader. An additional 20 faderless playbacks each include Choose, Go, Halt and Flash buttons. Styled in a similar manner to the Wholehog 3 console, the Expansion Wing is equally at home connected to a laptop, a desktop PC, a Hog iPC console, Road Hog consoles or a Wholehog 3 console.  A custom-made flightcase is included to protect your investment. USB connection to Wholehog 3 console, Hog iPC console, Road Hog console or Hog 3PC computer Internal USB hub supporting two external devices Sockets for two Wholehog LED desklights (supplied), fully dimmable Full Wholehog playback masters, identical to those on the console Multiple playback wings can be connected to the Wholehog software Ability to toggle Chosen Master and central controls Rugged, sleek anodized blue casing Adjustable LCD displays for playback bar status Status LEDs for power, hub status, and data in/out One type B USB input socket Two type A USB output sockets 20 masters, each with Choose, Go, Halt and Flash buttons and a Penny & Giles fader 20 faderless masters, each with Choose, Go, Halt and Flash buttons Next Page, Assert, Release, Skip Forward, Skip Backward Halt, Go, Enable, and Pig buttons LCD displays are software dimmable Bi-colour LEDs and desklights are software-dimmable Status LEDs for power, hub status and data in/out Designed for easy maintenance Auto-ranging mains input (90-250 VAC) Roadcase included

  • 1 Week $50.00
  • 2 Weeks $88.00
  • 4 Weeks $169.00
  • More details...

    ImageCue™ is a compact, easy to use image server that provides control of high definition still images and videos with only twelve channels of DMX512.   Each ImageCue™ includes a library of 255 images and videos. In addition, users can supply their own images and videos using a USB flash drive or external hard drive to provide access to over 65,000 image and video files.   ImageCue™ is fast – images and videos are selected and displayed/played in less than a quarter of a second.  You can instantly “bump” from image to image, image to video, video to video, or video to image.  Still images can also be crossfaded – with crossfade times of ½ second to 109 minutes in 1/10 second increments. ImageCue™ accepts JPEG files for still images, and H264 (AVI) video files.  PNG files with transparency can be overlaid onto images and videos.  A software utility to convert user content to H264 format is available for the following video file types:  MOV, MP4, AVI, MPEG, and VOB.   ImageCue™ gives the user full RGB mixing control of the background, and the color mixing can also be used in the foreground to tint images and videos.  Full dimming control is provided for the output.   ImageCue™ provides the power and elegance to select and display images and videos from your DMX512 lighting console, without the complexity of a media server.

  • 1 Week $46.00
  • 2 Weeks $90.00
  • 4 Weeks $160.00
  • More details...

    The LP-1500 series memory consoles feature; two scene preset mode, 12 pages of memory, softpatch, "Go" button with timed fades, point cues, 12 chase effects, analog and DMX-512 output and bump buttons with add and solo modes. LP-1524 LP-1536 LP-1548 Channels 24 36 48 Two Scene Preset Mode Yes Yes Yes Preset Faders 24 36 48 Preset Memory 288 432 432 Cue Stack with Point Cues 288 288 288 Go Button Yes Yes Yes Bump Buttons Yes Yes Yes Split Dipless Crossfader Yes Yes Yes Chase Memory 11 Patterns 20 Steps 11 Patterns 20 Steps 11 Patterns 20 Steps DMX Output 512 Channels 512 Channels 512 Channels Analog Output [CJ Standard] optional optional optional D-Sub Connector [Analog] optional optional optional Socapex Connector [Analog] optional optional optional MIDI Dimmer Out Yes Yes Yes MIDI System In/Out Yes Yes Yes Timed Fades Yes Yes Yes Softpatch (Programmable) 2 2 2 Blind Edit Yes Yes Yes Littlite® Worklamp Yes Yes Yes Weight-lbs (boxed) 20 26 28 Height, Width, Depth in Inches* 3.88 x 30.16 x 13.78 3.88 x 39.67 x 13.78 3.88 x 49.25 x 13.78 * Allow room for outboard transformer (6.25” x 3” x 2.25”), plus room for cords, when quoting sizes to case manufacturer.

  • 1 Week $62.00
  • 2 Weeks $120.00
  • 4 Weeks $215.00
  • More details...

    The LP-1500 series memory consoles feature; two scene preset mode, 12 pages of memory, softpatch, "Go" button with timed fades, point cues, 12 chase effects, analog and DMX-512 output and bump buttons with add and solo modes. LP-1524 LP-1536 LP-1548 Channels 24 36 48 Two Scene Preset Mode Yes Yes Yes Preset Faders 24 36 48 Preset Memory 288 432 432 Cue Stack with Point Cues 288 288 288 Go Button Yes Yes Yes Bump Buttons Yes Yes Yes Split Dipless Crossfader Yes Yes Yes Chase Memory 11 Patterns 20 Steps 11 Patterns 20 Steps 11 Patterns 20 Steps DMX Output 512 Channels 512 Channels 512 Channels Analog Output [CJ Standard] optional optional optional D-Sub Connector [Analog] optional optional optional Socapex Connector [Analog] optional optional optional MIDI Dimmer Out Yes Yes Yes MIDI System In/Out Yes Yes Yes Timed Fades Yes Yes Yes Softpatch (Programmable) 2 2 2 Blind Edit Yes Yes Yes Littlite® Worklamp Yes Yes Yes Weight-lbs (boxed) 20 26 28 Height, Width, Depth in Inches* 3.88 x 30.16 x 13.78 3.88 x 39.67 x 13.78 3.88 x 49.25 x 13.78 * Allow room for outboard transformer (6.25” x 3” x 2.25”), plus room for cords, when quoting sizes to case manufacturer.

  • 1 Week $62.00
  • 2 Weeks $120.00
  • 4 Weeks $215.00
  • More details...

    The LM-850 is three boards in one.   A fully programmable memory controller able to store and recall 100 scenes. A sophisticated MIDI console with comprehensive MIDI implementation, easily interfaced with sequencers, keyboards and MIDI systems. A stand alone manual controller, allowing you to "create" spontaneously. Operation: 32 character backlit LCD display with keypad lets you assign names to scenes, chases and songs while built-in "help" function ensures user friendly operation.

  • 1 Week $0.00
  • 2 Weeks $0.00
  • 4 Weeks $0.00
  • More details...

    Ether2DMX8 is a highly capable DMX router and much more! As a DMX router, it translates Artnet protocol into DMX in/out universes but can also be used as a DMX merger, DMX splitter hub, fail safe device, cue playback, and DMX viewer monitor. As an extension for the M1 console it provides 8 additional DMX ports and includes the required DMX license. When connected to a standalone PC, the Ether2DMX8 also becomes the license key for M-PC and provides 8 DMX Universes.   Artnet to DMX conversion DMX to Artnet conversion 10 Factory Presets 10 User Presets 99 Cues with Fade Time, Hold Time and Cue Linking 8 Switch Inputs 8 XLR female 5pins DMX Monitor DMX and Artnet Test Generator Multiple Artnet IP in for backup system USB port for backup and firmware updates M1 Extension with 8x DMX512 M-PC License with 8x DMX512

  • 1 Week $49.00
  • 2 Weeks $91.00
  • 4 Weeks $160.00
  • More details...

    The perfect controller for the club and mobile DJ market. This Windows based controller is very easy to use, with an intuitive user interface. LightJockey 2 incorporates a host of useful upgrades that make this Windows-based controller an even more flexible and easy to use lighting tool. With upgraded features like a new PCI card for increased PC interface capabilities (also USB and PCMCIA interface options), LightJockey 2.0 is an advancement on Martin´s industry standard LightJockey controller. Windows 2000 compatible, other new features include a Solid Beam Virtual Visualizer, a high quality visualization simulator capable of creating realistic, solid, 3D beams. Visually accurate and easy to understand, the simulator allows you to create virtual visualizations off-site. For more flexible music capabilities, LightJockey 2.0 interfaces with WinampTM* to play a multitude of digital audio files including MP3. LightJockey 2.0 includes audio CD ROM capability as well. It also supports SMPTE and MIDI timecode with suitable interface. And a new show-saver backup feature ensures that your shows won’t be lost. Extremely powerful, LightJockey 2.0 includes all the original features that have made the LightJockey the choice of lighting professionals in the Club, Mobile DJ, Touring and Special Events markets: large fixture library, user friendly graphic functionality, advanced shape generator for fast and intuitive automated movement programming, as well as all the benefits of the Windows environment such as resizing of windows and drag and drop technology. Devoted to designing the very best lighting control systems on the market, Martin’s LightJockey 2.0 offers lighting designers increased flexibility, spontaneity and ease of use in a user-focused control package. Windows 2000, Win ME, Win 98-95 based controller. Large fixture library and user configurable editor. Solid beam virtual visualizer for programming shows off-site. Supports MP3, audio CD, SMPTE and MIDI timecode. PCI, USB, PCMCIA interface options. Control of up to 100 fixtures, 2048 DMX channels. Integration with 2532 and 2518 for more direct access. Graphical representation of all fixture functions.

  • 1 Week $406.00
  • 2 Weeks $773.00
  • 4 Weeks $1381.00
  • More details...

    M2PC is the complementary control surface to Martin’s M-PC controller software. Featuring the same layout and portable size as the M2GO, the M2PC delivers a professional level of features directly from any PC. Following the philosophy and simplicity of our current controller platform, such as the Martin M1, the Martin M2PC is one of the most powerful and affordable PC-based lighting controllers on the market.   Features USB 2.0 Connection to Windows PC 3.5” touchscreen for fast and direct parameter access 4 digital encoders for parameters 8 customizable function keys 2 DMX ports standard; 2 additional internal DMX ports can be added as options Standard license for 4 Universes - up to 64 Universes with optional expansion license pack Controls up to 32768 parameters Customizable Graphical User Interface with context sensitive toolbars and integrated Help menu Powerful effects engine 1000 cuelists with fader control 1000 cuelists with playback control buttons Parallel execution of multiple cuelists Submaster, Groupmaster and Override functionality Parameter and Time-fanning functionality Auto update for presets and cues On-the-fly global timing adjustments Mx Manager Software for programming and triggering via time and calendar schedules Multiple wing attachment (MaxModules) Physical Length: 300 mm (11.8 in.) Width: 540 mm (21.3 in.) Height: 99 mm (3.9 in.) Weight: 4.6 kg (10.1 lbs.) Control and Programming Protocol: DMX512A (RDM), Artnet2 4 DMX universes, expandable to 64 2048 channels, expandable to 32768 No limit to number of DMX channels per fixture Extensive fixture library for all known manufacturers 65000 presets for each group of functions (P/T, color, gobo, etc.) Effect generator for automated programming of complex effects Customizable highlight and lowlight function to identify individual fixtures Relative or absolute programming Fan function for all channels (including timing parameters) On-the-fly global timing changes Virtual cuelists Macros Wait, follow and link cues HTP, LTP, chase, timecode, submaster and group master playback functionality Individual parameter timings Intuitive patch feature Fixture type cloning All channels with 16-bit resolution Control/User Interface Main playback interface: Ten 60 mm (2.4 in.) playback faders, each with four function-assignable buttons Eight customizable multi-function keys Playback Select button Master Go section with Go, Pause, Snap and Release Four digital rotary encoders with push function and status LED for fixture parameter control 3.5” touch screen for parameter groups, effect parameters, fanning and global timings Grand master rotary fader and button Blind/preview button Customizable highlight/lowlight function Customizable parameter defaults Next/last fixtures/groups Large command keys Playback Assign a cue, cuelist or effect to any playback fader 100 playback banks, each containing 10 playbacks 100 pages of 100 playbacks activated by touch screen button No limit to cues per cuelist Full 16-bit fading for high-resolution fixtures Individual fade in/fade out times for all playbacks Manual override available at all times Live 0-1000% override of global cue timings Live programmer timing (“Sneak”) Cuelists can be executed in tracking or non-tracking mode Software Uses Martin M-PC software on any Windows XP, Windows 7 (32 or 64-bit) PC Connections 2 x DMX universe outputs: 5-pin locking XLR Additional 2 x internal DMX universe outputs: 5-pin locking XLR (optional) Ready to receive internal MIDI module and SMPTE timecode module Internal MIDI in/out/thru (MIDI show control, MIDI notes, MIDI timecode): Optional Internal SMPTE Timecode In/Out: 3-pin XLR (optional) 12 VDC power supply input: 4-pin XLR Desk lamp: XLR Electrical AC mains power to 12 VDC external PSU (included): 100-240 V nominal, 50/60 Hz Maximum current: 1.4 A 12 VDC output: 5 A, 60 W max.

  • 1 Week $744.00
  • 2 Weeks $1413.00
  • 4 Weeks $2538.00
  • More details...

    Maxxyz is Martin’s new professional lighting console and the most advanced stage lighting console on the market today thanks to a string of highly original features and intuitive design. Maxxyz incorporates all the features that professionals should expect: fast processing power, direct fixture access, powerful effects generator, USB, motorized faders, quality touch screens, along with SMPTE/VITC/LANC/MIDI timecoding. But Maxxyz also offers programmers and LDs a string of impressive new features. Maxxyz is one of the first of its kind to incorporate digital LCD buttons designed for tailored, flexible programming. This lets you group functions to an LCD button and customize your console layout to enhance ease of navigation and fast recognition. A key element of Maxxyz is its built-in 3D Visualizer, fully integrated into the console software. The Visualizer allows you to view your light shows in highly realistic 3D. Full real-time PREVIEW allows you to create and refine your designs without interrupting the running show. Maxxyz has been developed with multimedia in mind. The console has a DVD/CD-RW multi-drive so you can synchronize your light shows with audio and video. The combination drive also lets you save your shows to CD-ROM, or you can use it to watch your favorite DVDs during those idle moments. Maxxyz also has a further 39 GB of space available for backup purposes. Along with the 8 DMX universes available directly from the console, Maxxyz is also fully Ethernet enabled. By connecting to a series of EtherDMX boxes, Maxxyz’ capacity expands to 32 DMX universes or up to 32,768 channels. The fast Ethernet network lets you connect to the console from a remote location via PC or laptop. You can also connect to the Internet for software updates, service and support, or to make remote programming modifications from anywhere in the world. Inside the console are two 1.2 GHz, Pentium III processors, two complete computer systems that run in tandem and operate as one large, integrated system. If one CPU fails, the other will act as backup to preserve the core functions of the console during a show. Integrated 3D Visualizer: preview or program in real-time 3D. DVD/CD/CD-R drive. Digital LCD buttons for fast and direct programming. Remote capabilities: via Ethernet or Internet from a laptop or other console. Multiple wing attachment. Built-in intercom station and headset. Up to 32 DMX universes, 8 available directly from the console. Motorized faders. Dual processing power, 2 x 1.2 GHz Pentium III CPUs.

  • 1 Week $88.00
  • 2 Weeks $163.00
  • 4 Weeks $300.00
  • More details...

  • 1 Week $100.00
  • 2 Weeks $185.00
  • 4 Weeks $342.00
  • More details...

    The Elo line of touchmonitors gives you the advantage of nearly 40 years of experience in touchmonitor design. We continuously listen to our customers' demands for better touch solutions, and we've implemented these needs into our newest line of touchmonitors-which can truly be called "designed for touch." In the new line, Elo has applied its extensive knowledge of touch technologies, CRTs, and LCDs to the design and manufacture of consistently high-quality, reliable touchmonitors with full agency approvals and renowned service and support. Features: • "Designed for touch" features such as a stable tilt base. • Sealed touchscreen. • Dual serial/USB interface. • Mounting holes on base bottom for tabletop security. • Controls on the side rather than the front, plus lockout function for public use. • Digital on-screen display (OSD). • Worldwide agency approvals. Specifications: • 17" Touch LCD. • Analog. • Dark Gray. • Resolution 1280 x 1024. • Brightness 230 cd/m2. • Contrast Ratio 450:1. • Response Time 25 ms.

  • 1 Week $0.00
  • 2 Weeks $0.00
  • 4 Weeks $0.00
  • More details...

    Digital audio workstations as well as lighting and show control software make use of MTC midi timecode for synchronisation. The new mif4 provides professional interfacing to standard LTC (SMPTE) timecode. Rosendahl sync algorithms suppress timecode jitter and drop outs.   SOURCE = LTC read LTC (SMPTE) timecode, display and convert into MTC/USB midi time code and regenerate LTC (SMPTE) timecode. SOURCE = MIDI read MTC from MIDI input, display and convert into LTC (SMPTE) and regenerate MTC/USB midi timecode. SOURCE = USB read MTC from USB, display and convert into LTC (SMPTE) and regenerate MTC/USB midi timecode. SOURCE = GEN the timecode generator can be set up and started manually or remote controlled by MMC midi machine control comands. FPS timecode standards are automatically detected and displayed by the four FPS LEDs (24, 25, 30 Frames Per Second, DF is SMPTE Drop Frame standard). DISPLAY = TC shows timecode in hours, minutes, seconds and frames. DISPLAY = UB SMPTE user bits, 8 nibbles shown hexadezimal. DISPLAY = CAL informs about timecode speed. 29.97 non drop timecode for example is indicated by 30 FPS LED and calibration 0.9990. DISPLAY = REF PAL or NTSC video syncs (576i, 480i) as well as HD tri-level syncs (720p, 1080i, 1080p) are automatically detected and displayed along with their frame rate.

  • 1 Week $119.00
  • 2 Weeks $213.00
  • 4 Weeks $406.00
  • More details...

    Gigabit Ethernet switches designed for portable entertainment and staging applications.  Rugged! Reconfigurable! Managed and Unmanaged Rack Mount units, and Unmanaged Portable Mount units. 1U Rack Mount is fully populated with movable port modules. Any combination of the 10 auto-switching ports can be moved between front and rear panels for practical, gig-specific wiring. Professional quality switches suitable for high-volume, multicast, video, audio, or lighting data. Rack Mount and Portable Mount versions. Reconfigurable! Any combination of Rack Mount unit’s data port modules can be moved between front and rear panels. Optional fiber connectivity via 1 or 2 heavy-duty OpticalCON QUAD connectors. Gigabit Ethernet ports: 8 to 10 auto-switching with tour-grade EtherCON connectors. Internal components shock-mounted for reliability. Compatible with a wide range of entertainment-specific protocols, including HippoNet, ACN, ArtNet, CobraNet, ETCNet, Ethersound, and MA-Net. Variable power input, 90-260 VAC, 50-60 Hz with PowerCON connector. Portable Mount GBS comes standard with pre-drilled, removable yoke for a variety of convenient mounting options.

  • 1 Week $119.00
  • 2 Weeks $213.00
  • 4 Weeks $406.00
  • More details...

    Gigabit Ethernet switches designed for portable entertainment and staging applications. Rugged! Reconfigurable! Managed and Unmanaged Rack Mount units, and Unmanaged Portable Mount units. 1U Rack Mount is fully populated with movable port modules. Any combination of the 10 auto-switching ports can be moved between front and rear panels for practical, gig-specific wiring.   Professional quality switches suitable for high-volume, multicast, video, audio, or lighting data. Rack Mount and Portable Mount versions. Reconfigurable! Any combination of Rack Mount unit’s data port modules can be moved between front and rear panels. Optional fiber connectivity via 1 or 2 heavy-duty OpticalCON QUAD connectors. Gigabit Ethernet ports: 8 to 10 auto-switching with tour-grade EtherCON connectors. Internal components shock-mounted for reliability. Compatible with a wide range of entertainment-specific protocols, including HippoNet, ACN, ArtNet, CobraNet, ETCNet, Ethersound, and MA-Net. Variable power input, 90-260 VAC, 50-60 Hz with PowerCON connector. Portable Mount GBS comes standard with pre-drilled, removable yoke for a variety of convenient mounting options.

  • 1 Week $63.00
  • 2 Weeks $120.00
  • 4 Weeks $215.00
  • More details...

    The W-DMX BlackBox FLEX-1 G4 Transceiver is perfect as a single universe, highly flexible solution for W-DMX support in our indoor range.   The unit supports both transmit and receive modes of both DMX and RDM signals, and support for both 2.4GHz and 5.8GHz frequency bands, giving access to more channels and hence greater reliability.   With the optional Ethernet protocol support, the product can support any protocol in, be it Art-Net, sACN or ETC Net, and any protocol out, Ethernet or RS-485. Single Universe Outdoor DMX/RDM Transmitter/Receiver W-DMX G4 Protocol – backward compatible with G3 Tough Die-cast Metal Casing Invisi-wire High-Fidelity Technology - Output matches Input Datasafe Technology - Wireless Fidelity and Error correction Less Than 5ms Latency Complete DMX512 support Full RDM support One-button-to-go technology for ease of use Adaptive Frequency Hopping Radio 2.4GHz radio – license free worldwide 5.8GHz dualband – provides access to ‘virgin’ spectrum Expandable with Ethernet lighting protocol support 12V Support Interchangeable antennas – easily expand your range Ships standard with 2dBi indoor antenna Compatible with all W-DMX OEM product