•  Professional 3G/HD/SD Test Pattern Generator featuring:
    – 26 Selectable Output Formats
    – 54 Test Patterns including Luma and Chroma Zone-plates
•  Audio Tone Generator
•  In Quad-Split mode the first 8-channels of audio from any
    input can now be passed to both the HDMI and SDI output
•  On-screen audio id pop-up when selection audio source in
    Quad-Split mode
•  On-screen display pop-up when using the rotary to allow for
    use when without a PC
•  Low cost miniature (3G/HD/SD)-SDI 4 to 1 Quad Split or
    4 to 1 input multiplexer
•  Selectable output format in Quad-Split mode
•  Dynamic UMD and Tally support via RS422/485 pins on
    RJ45 connector
•  GPI on RJ-45 for remote switching and Tallies
•  Low latency buffering for each input allowing
    non-synchronous inputs
•  Linked (3G/HD/SD)-SDI and HDMI outputs
•  4 x (3G/HD/SD)-SDI inputs with auto detection
    (26 Formats supported in total)
•  8-Channel Audio metering for each quadrant with:
    – The first two audio groups individually selectable
    – Vertical or Horizontal Bars
    – AES/EBU, VU, Extended VU, BBC, EBU, DIN and
      NORDIC Scales
    – Bar & Float, Bar only or
      Float only (Float is not available for MQS serials)
    – Transparency adjustment
    – Separate Bar and Float Ballistics control
    – Adjustable Reference level
    – Red, Yellow and Green Range adjustment
    – Bar thickness adjustment
    – Margin adjustment
•  Each quadrant is independent of the others, allowing any
    3G/HD/SD format of any frame rate to be displayed
•  Variable aspect ratios per quadrant
•  All 4 inputs can be displayed simultaneously on a single
•  Pass-Through mode allowing any of the 4 inputs to be
    selected for output
•  In Pass-Through mode the selected input is passed through
    to both the (3G/HD/SD)-SDI and HDMI outputs
•  On-Screen 16 character IDs (UMDs) for each input
•  An extensive selection of user controllable functions via a
    easy to use rotary encoder for menu selection. LEDs and a
    push button can then be used for status and control
•  USB port for control and updates
•  Locking DC Power Socket
•  The following is included with the unit:
    Power Supply, HDMI Cable, USB Cable and
    Mounting Bracket