Overview

A highly anticipated update to the FiberSource QFX 150, the new RUSH FiberSource 1 is a powerful tool for illuminating fiber optic cables in permanent installations. With a new 78 W LED fiber projector, the RUSH FiberSource 1 boasts improved efficiency and reliability while retaining all the key features of its predecessor, such as nine interchangeable colors, a twinkle effects wheel, electronic dimming and DMX/stand-alone control.

  • 78 W LED fiber projector
  • 9 interchangeable colors
  • 0-100% electronic intensity control
  • 78 W LED fiber projector
  • 9 interchangeable colors
  • 0-100% electronic intensity control
  • Twinkle effect wheel
  • DMX or stand-alone control
  • Up to 300 fiber cables (1 mm)
Physical Length: 305 mm (12.0 in.)
Width: 210 mm (8.3 in.)
Height: 200 mm (7.9 in.)
Weight: 7.6 kg (16.8 lbs.)
Dynamic Effects Color wheel: 9 interchangeable filters + open, indexing, continuous rotation
Twinkle effect: Continuous rotation, variable speed and direction
Dimmer: 0 – 100% continuous dimming
Control and Programming Control options: DMX, standalone, master/slave
DMX channels: 5
Standalone programming: DIP switch
Settings and DMX addressing: DIP switch
DMX compliance: USITT DMX512/1990
OpticsLight source: CREE 78 W LEDColor temperature: 6000–7000 KCRI (color rendering index): >70
Minimum LED lifetime: 35 000 hours (to >70% luminous output)**Figure obtained under test conditions
Construction Color: Black (RAL 9005)
Housing: Steel and aluminum
Protection rating: IP20
Installation Mounting points: Four rubber-mounting grommets, two Ø13 mm holes for rigging clamps
Location: Indoor use only, must be fastened to surface or structure
Minimum distance to combustible materials: 0.2 m (7.9 in.)
Minimum clearance around fans and vents: 0.1 m (4.0 in.)
Orientation: Any
Connections AC power in/out: Neutrik PowerConDMX data in/out: 3-pin and 5-pin locking XLR
Electrical AC power: 100-240 V, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Typical Power and Current 110 V, 60 Hz: 0.8 A, 87 W, PF 0.986230 V, 50 Hz: 0.5 A, 86 W, PF 0.909
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal Cooling: Forced air (regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Maximum surface temperature, steady state, at 40° C ambient: 50º C (122° F)