Martin MAC 401 Dual Featured

Rental Cost
1 week
$210
2 weeks
$394
4 weeks
$744
 
Brochure
User Manual
Specifications
 
Martin MAC 401 Dual

 

The MAC 401 Dual RGB Zoom is a creatively fresh and versatile LED moving head wash light with an innovative double-sided design that gives it flexible dual functionality, for example as a double wash light or beam reflective mirror. The MAC 401 Dual’s advanced wash characteristics combine with a host of other useful features like fast zoom and individual LED segment control to add a new and inventive element to touring and rental applications, TV shows, corporate events, night-time venues and leisure environments.
 
Features
  • Very bright - over 6600 lumens of output
  • 36 lenses in four individually controllable groups
  • Broad beam look with speedy zoom
  • Built-in macro effects
  • Low noise operation
  • Extremely energy efficient
  • Double washlight, beam reflective mirror, upcoming options
  • Accessory gel frame holder
  • RGB and Hue/Saturation control modes

Physical
Length: 221 mm (8.7 in.)
Width: 505 mm (19.9 in.)
Height: 527 mm (20.7 in.)
Weight: 21 kg (46.3 lbs.) incl. 2 head modules, excl. brackets

Dynamic Effects
Color mixing: RGB or HSV
Red or hue: 0 - 100%
Green or saturation: 0 - 100%
Blue or value: 0 - 100%
Color temperature control: Variable 10 000 - 2000 K
Electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
Pre-programmed effects: Two superimposable chase/pulse/flip/flicker/strobe/static effects with variable intensity, x-fading and 'pixel wheel' rotation speed
Strobe effect: Electronic, with pulse and random effects
Electronic dimming: 0 - 100%, four dimming curve options
Zoom: 16° in Hypermode, 20° - 50°
Pan: 630° with two speed settings
Tilt: 300° with two speed settings

Control and Programming
Control: DMX
Color control modes: RGB + CTC (raw and calibrated), HSV
DMX channels: 13/17/21/25/33 depending on control mode & pixel grouping
Setting and addressing: Control panel with LED display
Protocol: USITT DMX512/1990
Transceiver: RS-485

Optics
Light source: 36 Osram multi-color LED high power emitters
LED refresh rate: 887 Hz

Construction
Color: Black
Housing: High-impact flame-retardant thermoplastic and die-cast aluminum
Protection rating: IP20

Installation
Mounting points: 2 pairs of 1/4-turn locks
Orientation: Any
Minimum distance to combustible materials: 200 mm (7.9 in.)
Minimum distance to illuminated surfaces: 200 mm (7.9 in.)
Minimum distance to persons and objects in beam zone: 1 m (3.3 ft.)

Connections
AC power input: Neutrik PowerCon
DMX data in/out: 5-pin locking XLR, RJ-45

Electrical
AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Main fuses: 10 AT (slow blow) x 2

Typical Power and Current
Only RGB Zoom module installed (standard configuration)
100 V, 50 Hz: 367 W, 3.7 A, PF 0.995
100 V, 60 Hz: 367 W, 3.7 A, PF 0.995
110 V, 60 Hz: 364 W, 3.3 A, PF 0.994
120 V, 60 Hz: 367 W, 3.1 A, PF 0.993
208 V, 60 Hz: 360 W, 1.8 A, PF 0.967
230 V, 50 Hz: 360 W, 1.7 A, PF 0.973
240 V, 50 Hz: 360 W, 1.6 A, PF 0.969
RGB Zoom and optional CT Zoom modules installed
100 V, 50 Hz: 770 W, 7.8 A, PF 0.996
100 V, 60 Hz: 765 W, 7.8 A, PF 0.997
110 V, 60 Hz: 755 W, 7.0 A, PF 0.995
120 V, 60 Hz: 749 W, 6.3 A, PF 0.993
208 V, 60 Hz: 732 W, 3.6 A, PF 0.980
230 V, 50 Hz: 731 W, 3.3 A, PF 0.965
240 V, 50 Hz: 730 W, 3.2 A, PF 0.955
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
PF = power factor

Thermal
Cooling: Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Maximum surface temperature, steady state: 80° C (176° F)
Total heat dissipation (calculated, +/- 10%), one module installed: 1250 BTU/hr.
Total heat dissipation (calculated, +/- 10%), two modules installed: 2630 BTU/hr.